TB-59 Bridge Trembucker
Summary
Trembucker version of the 59 Model bridge pickup is a versatile
P.A.F. humbucker with an articulate treble attack, full bottom end, and
scooped midrange.
Description
The 59 Trembucker
bridge model is great for all types of rock and blues. The vintage style
coils give it an airy quality that keep this pickup planted firmly in
the P.A.F. family, and the alnico 5 bar magnet, and vacuum wax potting
have been added to compensate for lighter guitar strings and louder
amplifiers than were ever used in the 50s. The result is a pickup with
tons of old-school tonal character, but with a brighter top end, and a
more compressed sound. Pair with the 59 neck model for an evenly
balanced output and tone. Trembuckers have wider pole piece spacing,
perfect for symmetrical positioning under the strings of guitars with a
tremolo or wide spaced hard tail bridge (2 or wider from the center of
the Low E to High E directly over the bridge pickup). Hand built in our
Santa Barbara, CA factory, the 59 Trembucker uses an alnico 5 bar
magnet, nickel silver bottom plate, 4-conductor lead wire for multiple
wiring options, and is vacuum wax potted for squeal-free performance.
Output
- DCR:8.5
- Magnet:Alnico 5
- Cable:4c Shielded
SH-1n (4 conducter) 59 Model Neck
Summary
A vintage-voiced, extremely versatile neck pickup that pairs well with most bridge humbuckers.
Description
The ’59 Model neck pickup is one of our most popular pickups
because it’s so versatile. It’s designed in the spirit of the original
P.A.F. humbuckers of the 1950s, with sweet sustain, full-sounding
chords, clear and bright attack, but we’ve made a few refinements to
slightly modernize the design and make it more adaptable to different
styles.
The ’59 has a full low end
which is great for adding character to your clean sounds and sustain to
your leads. The high end is slightly boosted for improved pick-attack
clarity and the mids are a little scooped for an open, smooth sound
that’s great for preserving the clarity of the individual notes in a
chord. Play softly and the mids and highs seem to fade back, but pick
hard and the note will be confident and clear. There isn’t a genre that
the ’59 can’t work within. It pairs nicely with a high output bridge
humbucker like the JB or Custom but is equally at home with more
moderate pickups like the ’59 bridge. And it’s a popular choice for
those with humbucker-routed Telecasters as well. And if you order a
four-conductor version for coil splitting, its single coil mode is
crystal clear.
The ’59
Model neck pickup is wound on Seymour’s Leesona 102 pickup winding
machine, the very one that was used in the Gibson factory in Kalamazoo,
MI in the 1950s. It comes standard with a long-legged nickel silver
bottom plate, vintage single conductor braided push back lead wire and
no logo.
Output
- DCR:7.6
- Magnet:Alnico 5
- Cable:4c Braided Shield
