Pearly Gates Bridge
Summary
Imagine a P.A.F. with extra midrange sizzle that’s been dipped in Texas hot sauce. That’s the Pearly Gates.
Description
The Pearly Gates
bridge captures all the mojo of the original bridge pickup from Billy
Gibbons’ 1959 Les Paul. Seymour discovered the pickup had slightly more
output than most P.A.F.s, which helped to give it the extra drive that
makes this pickup so special. The Alnico 2 bar magnet keeps the high end
sounding airy but focused, and the midrange emphasis gives it a unique
Texas sizzle. Pinch harmonics really sing with this pickup too. It
really has a growl all its own and will help to bring any
humbucker-style instrument to life, but it’s also great for adding some
growl to a Stratocaster. Match with the Pearly Gates neck model for the
full Texas experience.
Hand
built in our Santa Barbara, CA factory, the Pearly Gates model humbucker
uses an alnico 2 bar magnet, nickel silver bottom plate, 4-conductor
lead wire for multiple wiring options, and is vacuum wax potted for
squeal-free performance. As with all of our P.A.F. style humbuckers,
every Pearly Gates is wound on Seymours original Leesona winding machine
from the early Gibson factory in Kalamazoo, Michigan for that
unmistakable vintage mojo.
Output
- DCR:8.1
- Magnet:Alnico 2
- Cable:4c Shielded
Pearly Gates Neck
Summary
P.A.F. style humbucker with a ton of rude Texas attitude for a neck tone that stays warm and focused.
Description
The Pearly Gates
neck captures all the mojo of the original neck pickup from Billy
Gibbons 1959 Les Paul. It is a P.A.F. with a unique tonal character, and
more midrange than typical humbuckers from that time. The result is a
neck pickup that cuts through with its stronger tailored mids, but still
has the open and airy treble attack of the alnico 2 bar magnet.
Combined with a warm, spongy low end, this pickup is great for both
rhythm and lead playing. Pair with the Pearly Gates bridge model for a
classic setup, or match it with a higher output bridge pickup like the
Custom Custom for a more aggressive rock setup.Hand built in our Santa
Barbara, CA factory, the Pearly Gates model humbucker uses an alnico 2
bar magnet, nickel silver bottom plate, 4-conductor lead wire for
multiple wiring options, and is vacuum wax potted for squeal-free
performance. As with all of our P.A.F. style humbuckers, every Pearly
Gates is wound on Seymour’s original Leesona winding machine from the
early Gibson factory in Kalamazoo, Michigan, for that unmistakable
vintage mojo.
Output
- DCR:7.3
- Magnet:Alnico 2
- Cable:4c Shielded